CPH Series-Guangdong Zhicheng Champion Group Co., Ltd._ Battery

Champion CPS Series UPS is the world's most advanced true On-Line Uninterruptible Power System. Champion CPS series adopts Digital Signal Processor(DSP) Technology, uses High current & High voltage Intelligent Power Module, High Speed IGBT drive IC and professional drive circuit, so it provides 100% Pure Sine Wave out put, and it guarantees full safety of your highly sophisticated equipment. CPS series totally isolates its connected load from every power problem that arises from the mains supply. It ensures 100% protection to the load from the full range of power disturbances including harmonics, common-mode noise and fault conditions on the input bus and vice versa.

Features:

◆ True double-conversion
◆ Microprocessor control optimizes reliability
◆ Input power factor correction
◆ Output power factor 0.8
◆ Wide input voltage (110V-300V)

◆ Converter mode available
◆ ECO mode for energy saving
◆ Generator compatible
◆ Smart RS 232 communication port

Technical Parameters

Specification		CPH-2001L36V/48V CPH-2001S48V	CPH-2002L72V/48V CPH-2002S48V	CPH-2003L96V/48V CPH-2003S48V	CPH-2006	CPH-2010
UPS Rating		1KVA(800W)	2KVA(1600W)	3KVA(2400W)	6KVA(4800VA)	10KVA(8000W)
AC INPUT	Wiring	Single Phase(L+N+G)
	RatedVoltage	220v
	Voltage Range	110~300V
	Frequency Range	45~65Hz
	Input Power Factor	≥0.99 (100%Load)
	Harmonic current	≤5% (100%Load)
	Bypass input Voltage	170Vac~260Vac
	Bypass input Frequency	45~65Hz
AC OUTPUT	Output Phase	Single Phase(L+N+G)
	Power Rate	0.8
	THD	100% Liner load: <2% 100%Non-Liner load: <4%
	Output Voltage	200V/208V/220V/230V/240Vac(Can be set)
	Frequency	AC: Tracking Frequency，Battery mode: 50/60Hz土0.1%
	Peak Rate	3:1
	ACfaulty transfertime	0mS
	Bypass inverter conversion time	<1ms			0ms
	Frequency tracking range	45-65Hz
	Frequency tracking speed	1S/Hz
	Overload	105%-130%: 10mins，130%-150%: 1min,≥150%: 10S
BATTERY	Rated Batteryvoltage	36VDC/48VDC	72VDC/48VDC	96VDC/48VDC	192VDC/240VDC
	Float Charge Voltage	41.1V/54.8V	82.2V/54.8V	109.6V/54.8V	220V/274V
	Cyclic Charge Voltage	43.2V/57.6V	86.4V/57.6V	115.2V/57.5v	230.40V/288.0V
	Max.Charge Current	6A/10A	6A/10A	6A/10A	1A/2A/4A/6A
	Discharge end Voltage	31.5V/42.0V	63.0V/42.0V	84.0V/42.0V	168.0V/210.0V
	Rated discharge Current	26A/20A	26A/40A	26A/59A	28A/23A	46A/37A
General Parameters	Display	LED	LED	LED	LED/LCD	LED\|LCD
	Efficency	AC:>90%; Batt:>B8%			AC:>90%; Batt:>889%
	Noise	<50dB
	Working altitude	1000m
	Relative Humidity	0-95%
	Storage Temperature	-25℃ ~ +55℃ (Battery: -20℃ ~+40℃)
	Working Temperature	-10℃ ~ +40℃
	Cooling	Air-cooled
	Protection Class	Ip20
	Input Socket/Terminal	IEC320 c14	IEC320 c14	1EC320 c20	Terminal
	Output Sockct/Terminal	Standard*3pc	Standard*3pc	Standard*3pc15A Terminal	Terminal
	Power cables	10A Plug turn C13	10A Plug turn C13	13A Plug turn C13	/
	Long Backup	282x142x225	395x145x230	395x145x230	390x190x333	463x190x333
	Dimensions(LWHmm) Standard	340x142x340	435x160x340	435x160x340	/	/
	Rackmount	483x400x88	483x400x88	483x400x88	500x438x88	580x438x133
	Weight(kg)	L: 4kg / S: 10kg	L: 7kg / S: 18kg	L: 7.5kg / S: 24kg	12kg	16kg
Protections	Over-temp.protection	Radiator temperature>80℃ protection,<60℃ recovery
	Direct bus under / Over-voltage	Under-voltage: 200V, over-voltage: 430V
	Output under / Over Voltage	Under-voltage: 170V,over-voltage:265V
	Over-load	AC: switch to bypass and alarm, Battery: alarm and delay shutdown after overload
Others	Software function Setting	Various working modes and operating parameters can be set through the serial port software
	Self-Starting	Shut down after battery under-voltage protection , then resume automatically after AC ON.
	ECO function	ECO function with bypass priority
	Automatic shutdown	After the battery under-voltage protection, the auxiliary power will be turned off automatically after 5S
	Delayed shutdown	If failure while Battery discharging, the auxiliary power will be automatically turned off after 10mins
	Unattended working	Can start up and run automatically, and able to restart under non-damaged protection automatically
	Lithium battery adaptability	With lithium battery charging management and protection(BMS)
	Drycontact function	Expandable dry contact communication interface
	LCD/LED adaptation	Can automatically adapt to LCD and LED panels
	Batterycoldstart	With the function of battery cold startinverter
	lnterface	RS232/485/CAN/Ethernet
Electromagnetic Compatibility		Meet the relevant requirements of GB7260.2 C2Class